Children's electric car Mercedes GT3 Evo (black) - soft wheels, leather seat, remote control, lithium-ion battery

Children's electric car MERCEDES GT3 Evo, EVA soft wheels, eco-leather seat, remote control and lithium-ion battery.

Color: black

*Licensed by MERCEDES
*The toy has a CE certificate of conformity.

The vehicle is suitable for outdoor use (should not be left in direct rain), but it can also be used in larger rooms, on a terrace or in the living room. Ideal for children aged 1-5 years. With soft wheels and a leather seat!

LITHIUM-ION BATTERY:

Short charging time: about 5 hours
Operating time: about 1-2 hours
Modern and environmentally friendly battery that complies with EU directives
Ergonomic
Does not contain lead! (Gel batteries contain almost 75% lead)
Energy-saving!

Vehicle equipment:

2.4G remote control
- Soft start function
- EVA foam soft wheels
- Soft eco-leather seat
- Modern music panel with melodies
- Volume control
- Battery charge indicator (voltmeter) on the music panel
- Forward/reverse switch
- Light on/off switch
- ON/OFF button
- 1 x 12V 4.5Ah lithium-ion battery
- Charger (220-230V input)
- 3-point seat belts
- Illuminated front and rear lights
- Signal and music on the steering wheel - multi-function steering wheel
- Door opening (both)
- Door lock
- Additional wheels and handle for unloading the car after unloading
- 2 side mirrors
- 4 gears (forward: slow, fast, fastest; reverse: fixed)
- Speed ​​changes are controlled with remote control and accelerator

Vehicle specifications:

- Vehicle length: 114 cm
- Vehicle height: 45 cm
- Vehicle width (with mirrors): 69 cm
-1x lithium-ion battery 12V4.5Ah
- Two 45W motors
- Vehicle speed: 3-5 km/h
- Rear-wheel drive
- Vehicle weight: 14/17 kg
- Average driving time: 1-2 hours
- Short charging time: approx. 5 hours
- Ground clearance (distance from ground to chassis): approx. 6.5 cm
- Seat dimensions: approx. 39.5x22 cm
- Wheel diameter: 22.5 cm
- Maximum load capacity: 30 kg
- Single-seater car

INSTRUCTIONS FOR CODING THE REMOTE CONTROL:

Press the up and down arrow buttons on the remote control at the same time. While holding them down, turn on the car. After 2-3 seconds, release the button on the remote control - the LED should then flash, indicating that the remote control has been coded.

The kit comes with simple English instructions for assembling the car.